suzuki samurai Problems

I need a complete set of wiring harness ( e.g

Wed, 23 Sep 2009 05:54:39 GMT

...of wiring harness ( e.g computer box and etc.) Hi, Visit following link to buy Recent Suzuki Samurai Wiring http://www.automotix.net/partshotline-suzuki-samurai-electrical-requests.html Regards, ...

1986 suzuki samurai clutch doesn't disengage

Sat, 03 Apr 2010 23:36:38 GMT

suzuki samurai clutch doesn't disengage 1986 suzuki samurai clutch doesn't disengage even when pushed in , I have to keep the vehicle in nuetral to start it or it takes off..What could the problem be?

suzuki samurai

Mon, 15 Dec 2008 15:20:12 GMT

suzuki samurai my 1991 suzuki samurai is not getting any spark i got fuel and air but i am not getting any spark to the plugs what can be the problem Look at the timing belt and make sure it is on and

samurai toyota moto swap

Tue, 03 Feb 2009 06:29:11 GMT

...suzuki samurai and i am wondering what it would take to put a toyota 22r motor in the samurai. the transfer case and transmission is a divorced unit. any information would greatly be appreciated You ...

where can i go online to buy a new clutch disc for

Thu, 26 May 2011 23:47:37 GMT

...autozone,carquest and discount auto...to name a few... Hope this helped you ?? This guy had everything Samurai and is very knowledgeable: Suzuki Samurai Salvage 1 (641) ...

1991 suzuki samurai want start

Fri, 06 Jun 2008 13:01:21 GMT

...suzuki samurai want start I have a 1991 suzuki samurai it will not start it has fuel pressure and spark but the fuel injector is not pulsing the check engine light on the dash does not illuminate at ...

lights work starter works no

Thu, 18 Jun 2009 18:06:01 GMT

under the cap. suzuki-forums.com/suzuki-jimny-sierra-samurai-forum/24882-engine-won-t-fire-after-repainting-2.html replace the ignition module and the distributor stator, that should cure the problem

1988 Samurai clicks when i try to start

Tue, 09 Jun 2009 11:58:53 GMT

...clicks when i try to start I have a 1988 Suzuki Samurai and sometimes when I try to start it it just clicks and if i keep turning the key it will finally turn over. this is an starter soleniod ...

suzuki samurai rear end vibrating

Tue, 10 Mar 2009 12:55:32 GMT

suzuki samurai rear end vibrating I have problem with my suzuki samurai 1989. The rear end it starts to vibrating at high rpm. But at 80 kmh and over (4th and 5th gear) it gets much more vibrating. I ...

88 Suzuki samurai 4x4 will not engage.

Tue, 13 Jan 2009 01:21:13 GMT

...Suzuki samurai 4x4 will not engage. I have a 88 suzuki samurai. I moved the lever to four wheel drive made sure the manual lockouts were locked and the truck would not engage to 4WD. There isnt a ...

Where can I get keys

Tue, 22 Mar 2011 21:36:22 GMT

...1992 Suzuki Samurai? All the usual places say they can't make them. I have the original key, but want extra keys made. Thanks. They can only be purchesed from Suzuki dealers, they cornered the ...

suzuki samurai wont stay running at idle why? will

Tue, 31 May 2011 04:29:01 GMT

suzuki samurai wont stay running at idle why? will run if kept throttling Sounds like you have a air flow problem not real familiar with the suzuki but it may have a air flow adjustment or either a ...

89' Suzuki Samurai

Sun, 01 Mar 2009 23:31:53 GMT

...Suzuki Samurai Bought a used 1989 Suzuki Samurai, Everything else is fine execpt when I go up a Steep hill the car starts to **** and dies, but on a straight road works perfectly fine. Please advice ...

i have a 1990 suzuki samurai, engine turns over

Sat, 05 Sep 2009 15:48:36 GMT

...suzuki samurai, engine turns over but no sdpark. changed coil and ignition module. still no spark. what next? Try checking the contacts between the rotor button and the distributor cap, particularly ...

Suzuki samurai starter problems

Tue, 08 Feb 2011 11:35:33 GMT

Suzuki samurai starter problems You are not specific as to what is happening, but most people have the "click-click" problem. If that is it.....it means not enough power getting to the starter ...

from frontto back how are the cylinders numbered?

Thu, 30 Apr 2009 01:06:29 GMT

...Suzuki samurai and forgot which cylinder is the number 1 cylinder on a 1.3 liter 1986 Samurai can someone please tell me? It usually is the cylinder closest to the crankshaft pulley, if your standing ...

89 Suzuki samurai fuel issue

Sat, 17 Jan 2009 23:59:43 GMT

...Suzuki samurai fuel issue I have a 89 Suzuki samurai. I had to syphon gas out of the tank here recently and now i am having what seems to be a fuel problem.It will start and drive in first then when ...

The plug wires are all off of the plugs on my

Thu, 09 Apr 2009 13:15:46 GMT

2 This is the Firing order for the 1987 suzuki samurai with a 1.3 motor. When changing plugs, do them one at a time to prevent mixups. When changing plug wires, do them one at a time to prevent mixups

1991 Suzuki Sidekick instrument lights won't work

Fri, 07 Aug 2009 20:29:38 GMT

1991 Suzuki Sidekick instrument lights won't work Instrument lights won't work on a 1991 Suzuki Sidekick...trying to trace the problem. The radio was forcibly removed from the console and I think ...

How hard is it to replace the rear main seal in a '87 Samurai?

Sun, 17 May 2009 06:01:19 GMT

...Suzuki Samurai. The only mechanical issue with it is that the rear main seal is leaking (according to the seller). How difficult is this to replace? Would I have to pull the engine and transmission? ...

Stability

Wed, 09 Jul 2008 19:32:50 GMT

...Samurai 1995 and can't solve their stability problems when past over 80 km/h Hi maragato it is possible your front wheels need to be balanced on a digital tyre balancer. There is a possibility that ...

valve clearance

Tue, 26 Aug 2008 12:15:12 GMT

...most grateful if you could tell me what are the clearances, in mm, for the inlet & exhaust valves for my suzuki samurai SJ 413. Many thanks Nane M h i hope this helps good luck thanks for using ...

1991 suzuki 413 samurai timing

Mon, 10 Nov 2008 23:09:31 GMT

1991 suzuki 413 samurai timing i changed haed gasket and managed to unaline the two cogs what?

Rear wheel bearings for my 1988 Suzuki Samurai

Wed, 11 Feb 2009 12:56:13 GMT

Rear wheel bearings for my 1988 Suzuki Samurai Are the rear wheel bearings pressed in or do they slide out????? They are pressed in, not an easy job.

89 Suzuki Samurai, going up hill starts to shake

Sun, 01 Mar 2009 23:41:14 GMT

...Suzuki Samurai, going up hill starts to shake and dies, but on a straight road its perfectly normal. Can someone please help me? thanks check out the pressure in the fuel pump.and cleabn the fuel ...

suzuki samurai 1991 replaced the starter motor 3 times the cables

Thu, 05 Mar 2009 21:01:50 GMT

suzuki samurai 1991 replaced the starter motor 3 times the cables and the battery and the cellonoid and it clicks but won't start there must be some carbon on the battery points clean the carbon and ...

Ignition wiring circuit - 1987 Suzuki Samurai

Thu, 26 Mar 2009 19:06:11 GMT

Ignition wiring circuit - 1987 Suzuki Samurai Ignition fuse keeps blowing; need wiring diagram http://www.acksfaq.com/faqsearchresults-.php

I need a diagram please?

Thu, 30 Apr 2009 02:01:02 GMT

I need a diagram please? do you have a diagram of cylinder numbers for a Suzuki samurai 1986 1.3 liter anyone? http://zukioffroad.com/Tech_Library/samurai_specifications.htm

1988 suzuki samurai, runs fine cold but when it

Wed, 19 Aug 2009 12:46:46 GMT

...suzuki samurai, runs fine cold but when it warms up starts missing (undrivable). Something is cutting off the fuel to the 2 rear cylenders. you can look in the carb and see one jet just about shuts ...

where is the transmission filtor located on a 89 suzuki samurai

Fri, 02 Oct 2009 15:57:24 GMT

where is the transmission filtor located on a 89 suzuki samurai 4x4 Standard There is no transmission filter on this vehicle transmission service consists of draining and refilling the trans.