Questions & Answers for: suzuki rm bogs

Question about Motorcycles

2 Answers

...Suzuki RM 125 When hot or cold, I run up through the gears and back down once or twice and then at low rpm as I'm trying to get back up to speed the engine bogs. If I shut it down and kick it back ...

Ad

...rm 125 starts and idols fine, bogs out on take off!!!! got the bike, it original had a choke problem, swaped out chokes from a 73 yamaha 125, bike now starts evey 2-4 kicks, idols fine, take off its ...

Ad

Question about 2003 RM 125

1 Answer

88 LT500 BOGGING DOWN 88 lt 500 fresh top end new pipe jeted to pipe and just broke in and started bogging at 3/4 throttle changed main same thing, dropped the needle down one now wont rev past 1/4 ...

...fine. also going up a hill it will bog down. Is the a carb jetting issue. The problem is on an 2000 Suzuki lt80 atv. Thanks Tony sounds like trash in the carb clogging the main ...

...suzuki rm 85 wont start cleaned carburetor, 2003 suzuki rm 85 wont start cleaned carburetor, new plug, changed gas it ran fine then just quit now only turns over for few seconds then bogs down if it ...

...Suzuki rm 125 kick starts with brand new spark plug then eventually bogs down and dies, does the same when push started, does it need new piston and rings? HI,,sounds like your plug is fouling,,what ...

i got a littl bog then it hits the power band why how can i get my bike to have more power and less bog but get more spped with the power and i dont want to borre it out can put a larger sprocket on ...

i have a 2007 suzuki rm85 motorcycle and have problems with it bogging and cutting out why ? Try changing the sparh plug, cleaning the air filter and adjusting the carb.

Why is my Suzuki RM85 2007 bogging and cutting out? We have replaced stator and set float level to specification of 19mm. Keihin PE28 Carburettor try a smaller main jet,use good 2stroke oil,i use ...

Why does my Suzuki RM85 2007 bog and cut out when accelerating? Have replaced stator and set float level to specification of 19mm. Carburettor is Keihin PE28. make sure jets are clear

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...