Questions & Answers for: suzuki intruder oil gear shift

...of -----------, Also the shifter does not return from 1st to neutral position without using foot. Thanks, moe. 1 Dirty Oil / Low oil 2 broken return spring on gear lever 3 Clutch worn hope this ...

...Suzuki Intruder vs800, I want to know what the proper oil and coolant levels are for this bike? Also I know its a 5speed, but what is the pattern for shifting(how many up/down)? the oil level is max ...

Intruder VS 800 will shift into gear but will not engage I was riding normally and all of the sudden i lost power. At first it would go slowly and then engage full power. When i stopped at the next ...

My 1400 gets stuck in gear,wont shift,I was down a quart of oil This sounds like a bent shift fork. A bent shift fork will not let the slider gear(s) move properly.

...suzuki vl 125 into first gear, you have to jolt the bike with a rev to engage first.any suggestions? many thanks Charlie . If the gearbox oil is REALLY dirty it can affect shifting.The only other ...

...oil viscosity? Up shifting CLUNK on a shaft drive motorcycle is caused by all the drive line slop. Don't tap the shifter with your foot when you shift. Try putting gentle pressure on the lever with ...

...Suzuki sells a 15w-50 full synthetic oil that is reasonably priced. Also , do not tap the shifter with your foot when shifting. Place your toe , pressing gently against the pedal , and then

...oil 10w40 suzuki oil can you get it out of gear?can you change geardoes the clutch drag  ( shifts are difficult )the clutch plates are froze/ stuck together, remove clutch, check plates for rust ...

...1988 1993 Suzuki Intruder Boulevard VS 1400 Repair Manual Download Manuals... OEM parts for ...

Suzuki intruder A grinding noise when you put the motorcycle into gear and it doesn't move could indicate several issues with the final drive on your Suzuki Intruder. Some possible causes are: Worn or