Questions & Answers for: surging applying brake

Front Brake Front brake pulses/surges when applied is almost certainly a warped front brake disc. Easy and quick to fix (less than 1 hour labor) but the disc itself can be expensive. Buy a quality ...

surge when creeping in traffic 2003 dakota quad cab 4x4 4.7 engine auto trans when creeping in traffic at stop sign with brakes applied the truck surges rapidly. I have seen these trucks do this from ...

Surge in idle when brakes applied or after driving.. I have a 92 300zx NA, when driving the ca and come to a stop, the idle will surge between 500-1500 rpms, this will then stop after a little less ...

brakes surge when applied you may need to replace the rotors,most times this will stop the surge.

94 K1500, brakes surging , If you feel a pulsing in the brake pedal when you apply the brakes, your brake rotors are warped. Replace them or have them cut true again.

After driving short time, apply brakes, and engine (2004 Santa Fe 2.7L with 155K Km) After driving short time, apply brakes, and engine seems to surge ahead (ie "bunny hops" against brake pressure). ...

...brake it stops surging Check the vacuum hose from the engine to the power brake vacuum reservoir, it make be loose or cracked and will cause an erratic idle because of the vacuum leak. Please rate ...

...need to replace the caliper. If the brake pedal is surging when you apply the brake (which would also be felt in the steering wheel then the new rotor was either incorrectly installed or is

my bmw 520i auto 2009 having a problem when she in stopped position with drive mode with brake paddle applied at some instance the car tend to surge ford slowly and i need to apply more force to the ...

85 g20..again, sorry.. parking brake light on.. can't turn it off have not found switch in there yet BUT that light dims when hydraulic brake applied AND oil pressure gauge goes up when brake applied!