Questions & Answers for: sunfire forward reverse

...sunfire starts, i go to shift into park or reverse, wont move in either. vehicles has been sitting for still for a yr. what is the problem? Put the car in neutral, can you get it to roll forward or ...

Ad

...sunfire w/2.2 will move a little forward running and in drive but feels like park brake is on ;its not. Try to go in reverse it wont but makes a loud clunking sound and it is a hard clunk like a ...

Ad

...sunfire won't drive forward but goes car won't drive forward but goes in reverse That would be your transmission. The only way to fix it is to have it rebuilt or buy new, both are around the same ...

...sunfire it will go into reverse then when you hit the gas it will just rev up has no problem in forward first check your transmission fluid level. if thats good the transmission probably is bad. If ...

...Sunfire no forward gears I have a 2002 Pontiac Sunfire with a 2.2 non ecotec and automatic transmission. While driving yesterday, I eased up on the throttle to make a left turn. When the coast was ...

...Sunfire has no forward gears, only reverse Where is the TCM? It sounds like a problem with your Transmission Control Module (TCM). The TCM is the brains behind the transmission on your car; it ...

Question about 2001 Sunfire

1 Answer

...forward to expise the rear of the lens. Turn the plug retainer counterclockwise until you can wiggle the plug containing the bulb out. Replace with a 9007 single bulb (the old one just pulls out). ...

...Sunfire Pontiac 2.2 coupe. Auto transaxle slipping in reverse. Forward gears OK. How to fix? Check the fluid level first . may wanna try sevicing fluid and filter. no adjustments or anthing you can ...

Question about 1/10 Scale Exceed-Rc SunFire "Fire Blue" EP Electric Off Road Buggy 4WD

1 Answer

my exceed doesnt go into reverse it will go forward but not backwards your ESC (speed controller needs resetting

sunfire seemed good a few days ago. then it started going all the way to the floor by itself. today it wouldnt go into reverse and seemed rough(not grinding) going into forwards. i clutch assembly, or

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...