Questions & Answers for: suction polaris pool cleaner

Will not pick up the trash. Seems to have no Will not pick up the trash. Seems to have no vacum suction. The 180 is a pressure system not vacuum. You must have good pressure for it to work properly. ...

...suction on bottom of unit Try these troubleshooting techniques for this automatic pool cleaner. First, check the thrust jet and make sure that it is getting proper thrust. Check the filter screen in ...

...polaris 180 to float more than its on the bottom of the pool? The cleaner could be getting too much pressure from the return line, causing it to lose suction and fly off the bottom. Confirm that the ...

Polaris 9300 Sport Robotic Pool Cleaner stops in water after running about 10 seconds. Check your pool cleaners filter screen in the in-line filter system and make sure that it is clear of debris. ...

no suction on polaris 380 Polaris works on pressure should be on its own line or return

My polaris 280 cleaner appears to be working but does not pick up debris. RPM ok. What is supposed to cause suction? check inside check belts and paddle wheel

...Polaris was spinning on its side. None of the jets in the suction chamber are functioning so the unit is not picking up debris. The propulsion jet is working on the back as is the tail sweeper. open ...

...polaris line connected to the side suction of the pool and the booster pump valves open, the skimmer and botton suctions closed. It is not working. What am I doing wrong? Polaris works on water ...

...suction should be hooked to its own return from booster pump if pump on and filter pump on check filter on the wall fitting if ok make sure water flow from that fitting (should be in middle of pool ...

Polaris pb4-60 Pump runs backwards creating suction and not pressure at the pool cleaner fitting. It has a century 3/4 1ph wired to 220. the motor model is173840pj What is the make and model of the ...