Questions & Answers for: submerge base

...submerge the base in water. The Water Tray, medicine Cup, and Cooling Chamber are top shelf dishwasher safe. you have to scrap it off and work at it if its real bad , I think the reason is because we ...

this correct? I usually just balance the tray upside down on top of the base and fill the edges with vinegar. You could also put the the tray in a bowl filled with vinegar and submerge the whole thing

...t have one just soak it up with towels. once that styrofoam piece on the left side of the base isnt submerged in water anymore then it should start. it could be a broken hose or bad part. check hoses ...

...base is submerge is because the pump have less restriction (Water to push) so the engine work is very light compare when she is submerge and have to push so much water alll the way throught the hose. ...

...NO! water where it might end up in the heating element and the base section should not ever be submerged for cleaning, only the removable

...submerge the base! Visually inspect the base for dirt or mineral build up. If soft water is used decalcifying the unit every 4 weeks with EZ Cal is suggested. If hard water is used the unit should be ...

...any debris from the perforated shroud. Please note, the cyclone pack should never be washed or submerged in water as this can cause damage to your machine not covered under guarantee. I hope

...dry before reassembling the vacuum. Please note, the cyclone pack should never be washed or submerged as this could cause damage not covered under guarantee. You can use a soft brush or a dry ...

...the machine. The cyclone pack itself doesn't require any maintenance - it should never be washed or submerged as this could cause damage not covered under your Dyson guarantee. However you can remove ...

...engine holds only 3.8 liters. If the engine is overfilled, the crank and connecting rods will be submerged in oil and can aerate air into the oil as it turns, causing low oil pressure, causing the ...