torque specs Need the torque specs for the flex p;ate to torque converter bolts. This is for a 1997 subaru 2.5 engine. 25 foot lbs
...subaru legacy outback all wheel drive. When I tried to bolt the torque converter to the flex plate the bolt holes didnot match. Only to find out that the torque converters were different sizes. The ...
torque specs 1995 subaru 1995 subaru legacy torque specs torque converter Did you want the torque converter mounting bolt torque? If so, it is 17 to 19 foot pounds.
...Subaru Impreza 1998 model Automatic, when driving it skips from gear 1 to 3, giving a sort of a jerking, i think it's a gearbox problem i love my car & would like it fixed if possible. Kindly ...
Subaru Legacy L Bogging when going down theroad not wanting to shift. Think it could be either the Catillitic converter or torque converter in trans. Not sure either way definately not the catylitic ...
...subaru outback legacy. I got a bad knocking noise in the front, its coming from the area flywheel & torque converter, I don't know what its called, some say its third member or transfer case ...
...TORQUE CONVERTER SEAL HOW HARD IS IT TO INSTALL A TORQUE CONVERTER SEAL IN MY 95 IMPREZA. hOW MUCH TIME DO I NEED TO ALLOW FOR THIS PROJECT. have to remove transmission to do this...can be big job if ...
...DIFFICULT IS IT TO INSTALL A TORQUE CONVERTER SEAL IN MY 95 SUBARU IMPREZA/ hOW MUCH TIME SHOULD I ALLOW TO COMPLETE THE JOB. tHANKS you will need to remove transmission...Can be big job
torque converter wont seat in the orgiinal place the transmission is on the car Torque converter has to click twice while turning it to sit in position.
...Subaru torque converters are touchy and will fail if installed improperly. You have to pull it as one unit. Front diff and torque converter. the converter is in front of the diff. You might want to ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions