...Subaru Outback - i need help setting the timing belt I replaced the water pump on the 2.5L outback wagon, and had to remove the timing belt in the process. i marked the timing belt & pinions prior to ...
Question about 1998 Forester
...subaru forester sorry didnt see the bit at the top, depending on how good you are with cars it can be relativley easy its on the front of the engine you may have to move a few things to get to it im ...
timing belt on 1996 subaru legacy 2.5L should there be tension on the cam when putting the timing belt together? There is a belt tensioner that you need to collapse and put a small nail or I use a pop
...timing belt, tensioner and camshaft angle sensor. Refer to the procedure in this section for removal and installation steps. Remove the left side camshaft pulley(s) and left side rear timing belt ...
...Subaru Legacy L - Is there a timing belt? yes, there is a big belt and it is a job to replace, remove just about everything up front, radiator, timing covers, fan, belts, pulleys, hoses, etc, I think ...
timing on my 87 subaru gl awd It's a bit of a pain but here is what you set it to: Aligning the marks on the flywheel with the marks on the flywheel cover Driver side timing belt (No. 2) and No. 2
...timing belt, drain coolant, remove and replace the water pump mounted on the front left of the engine, and re-assemble. Remember to follow correct procedure to reset the timing belt tensioner, and ...
Question about 2003 Outback
...subaru outback sedan? We were able to remove the top/upper bolt from the old tensioner; but cannot locate/see/reach and hence undo the bottom bolt to remove the tensioner. Any suggestions? tensioner ...
Question about 2003 Outback
...timing belt on 1993 Subaru impreza and cranked it and it sounded loud and rough? how do I diagnosis It? can I find online detailed instructions on the timing tensioner pully and how it needs to be ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions