Questions & Answers for: subaru hydraulic clutch pedal

legacy gt 92 single turbo clutch adjustment how do i adjust the hydraulic clutch on my 92 gt legacy Only clutch adjustment is at the pedal as they are hydraulic. Clutch may be worn, cheers

...have found that tells how a clutch works I am still not sure what you are talking about, but do you mean the clutch pedal went to the floor? if so you will need a new hydraulic clutch master

Subaru Forester, and the clutch has finally given out...to replace the clutch I was quoted between $800 - $1300 - so its not worth it to have it fixed. Engine runs fine, shifting has no effect now. Is

...subaru wagon manual trans will not engage gears.... The clutch has been weak for a few months prior to it not working.... The car will not engage gears... When you shift it feels like it goes in but ...

...Subaru WRX Wagon - every now and then, the clutch pedal doesn't disengage the clutch until way down on the pedal's travel. Other days, it's up at its normal position. I'm guessing that the clutch ...

...hydraulic or cable. Noise is usually either the throwout bearing going bad if it is when you start pressing on the pedal, or the clutch slipping when it is under 2nd grear hard acceleration. But ...

...clutch pedal and have to press it all the way to the floor to engage. Time for a new clutch? Before condemning the clutch, check the clutch hydraulics. If the hydraulics are failing, the clutch it ...

clutch pedal going to floor it linkage at clutch is not moving back as it should do 92 S-10?   2004 subaru?  hydraulic ? cable?

...have a hydraulic clutch, so there should be a return spring on the pedal or the master cylinder. if your clutch is hydraulic must bleeb the slave and make sure the pedal dont have a returning ...

...Subaru Forrester ... clutch bite point has come up to top of pedal push. Can I adjust this lower or is it the sign of clutch wearing out? It is possible that 'Yes' the clutch is going. Normally in ...