...a lot of the sub-zero doors are good and heavy duty, but the plastic shim under the hinge wears and can drag when you go to close door, usually a simply repair to find a washer for the door
Sub-zero Refrigerator Door I have a sub zero refrigerator and the door won't close tight. someone said that the rubber tubing around the door is worn out and something about magnets inside the tubing ...
Question about 650 / O Bottom Freezer Refrigerator
sub zero 550 refrigerator light not working My Sub Zero refrigerator light is not working. I checked the owners manual and it says the possible problem is the door was not shut properly, which may ...
sub zero # 650 door adjustment refer door adjustment There are two covers on each side of the door. They are between the door gasket and plastic housing. Remove these covers to access the bolts. They ...
Question about Bottom Freezer Refrigerator
Sub zero 550 (14 years old) has a small but steady leak onto floor from freezer compartment. Small amount of frost buildup on inside of door. Food is frozen and the door "appears" to seal we
Sub-Zero 642 freezer door for 50 seconds I cannot reopen the freezer door on our Sub-Zero 642 for a full 50+ seconds due to the vacuum seal. My Sub-Zero repairman said this is normal. Does anyone else
Question about Bottom Freezer Refrigerator
...Sub Zero does't have suction anymore When I closed the freezer drawer/door, the freezer had a suction action that sealed all of the seals. This suction, no longer happens. The rest of the freezer is ...
Question about 700TC Bottom Freezer Refrigerator
Sub Zero - 700 TCI 2 :Water is forming on bottom of Frig. Fridge is maintaining temps. Two Questions: 1. Is door adjustable? (Seems tighter on hinge side). 2. Is this just a seal problem? Most ...
...Sub Zero 601R refridge so the vacuum seal comes on? I replaced the door seal and now the suction will not come on an seal the unit. Can I be reset to come on? wow never heard of a vacuum sealing door ...
sub-zero refrigerator on but not cooling condenser fins clean, fan circulating, door seal new, door closed tight, temp at 65 degrees. If the compressor is running then it is probably low on gas. thats
Usually answered in minutes!
3,171 Questions
1,894 Questions
1,239 Questions
1,098 Questions
927 Questions