Questions & Answers for: stuck staple gun

...staple stuck in the trigger section of arrow t-50p there is a piece a staple stuck in the end of our staple gun and it is prohibiting any of the other staples from coming through. How do I get the ...

...pointing at your face! DO NOT squeeze the trigger! DO NOT use excessive force) If this method is of no avail for you, you have to disassemble the gun, and remove the metal hammer, and stuck

...staple gun #31600. Can not seem to get the unit to close after putting staples in. I do have the correct size staples I got some staples stuck in my Powerfast 31600 too. I THOUGHT they were the right ...

staple is stuck and have lost the instruction book I think a staple is stuck and have lost the instructions (workshop electric staple and nail gun ET-901 I decided to leave it, as I no longer need the

...stuck staple where the staple in the orifice where the staple comes out. Just use a small screwdriver and /or plier to remove the stuck staple which could be jammed against the hammer bar. You may ...

...stuck or wrong staples. I have had good luck removing the staple ram rod and rapping firmly on the **** of the stapler against a wooden table. The idea is jolting the stuck staples into reverse out ...

...stuck in my Arrow JT 21 staple gun. I can't get them to budge, and loading it is a problem. NOthing seems to work. Does anything flip down? The spring is out; staples are stuck and won't come out. ...

staple stuck in the chamber . Try to pick it out with a dental pick or similar tool. This happens a lot with stalpers there not that reliable the hammer one are the best but not good for fine work the

My staple gun will not shoot, its as if there is no pressure to shoot the staple in Sounds like you have a staple jammed in it , so the hammer is stuck.

...it seems like the plunger that shoots the staples is locked in a pushed out position you have a staple stuck inside. Use a non folding dull knife(butter knife) and needle nose plyers to remove