Questions & Answers for: strut rotate turning front wheels

front struts are out of the vehicle, you'll need to compress the springs before taking them apart. I did one myself using loaner spring compressors from Advanced Auto. I brought the second one into my

...front end clunks when going over bumps and when moving steering from side to side. have replaced sway bar bushings and links still clunks Check the macpherson struts to ensure they are not loose. One ...

...front ends makes noise when i hit bumps or hit my brake hard or hit any little bump, sounds like a wheel bearing but maybe cvc joints or whatever. anybody tell me whats the problem and how much it ...

...turning. ACTION: Noise, vibration, harness (NVH) conditions may originate from many areas. A thorough inspection of the front suspension is necessary to determine the cause. To service, refer to the ...

...front left tire is making a really rough sound. could the tire be out of round and not show up when it was on the back first check the tire, then check the wheel bearing is it the wheel itself making ...

...strut rotate when the front wheels are turned? does macpherson strut suspension system use only one control arm and one ball joint per side? yes just the lower control arm and lower ball joint ...

front struts are good but the bearings need to be replaced! Is there such as thing? Are they telling me the truth? Yes there is. one indication that bearings are going bad is, you will start hearing a

...rotate the tires they didn't catch this. The next time you have your tires rotated ask to have the jacked up front end tested for loose front end parts. They can shake it down physically looking for ...

...the transmission in neutral rotate each wheel by hand while holding onto the strut spring with your other hand. You should be able to feel the noise you hear in the strut spring if it is the

...I go faster or turn the wheel one direction or another like changing lanes. Can that be the front struts that is causing this? The tires have been balanced and rotated so that is not the problem. ...