Questions & Answers for: stove tries ignite itself

stove is turned on the igitors keep firing constantly. I tried unplugging the ignitors one at a time but they all keep firing even if the other ones are disconnected. Any idea what is going on? Thanks

...itself again. This will reoccur every 5-10 minutes......quite annoying and initially fearful. The stove is 15 years old and wondered if this thing is ready for the stove graveyard. The gas valve may ...

...stove top burners are not igniting. I've checked to make sure that the burners are dry and in place. The only way to turn the burners on is to use a match, but once the burner is shut off, it won't ...

stove burners are round and have small holes around their perimeter to allow gas to flow out and create a round flame. The gas coming from these holes is often ignited by a small vertical row of holes

...ignite it is a maytag 5 burner gas cook top 2 years old Hello there: A burner doesn't work The most common problem for gas surface burners is that they get gas but don't light. This is generally ...

...a new one. If yu leave it alone, it will probably wear itself out. Just make sure that the gas valves on the stove are in the off position so that they don't accidentally light on their own. Good ...

...tries to relight itself the ignitor clicks 4 times, lights but then goes off within 2-3 seconds. It will try this a couple of more times before stopping altogether. Any ideas? That sound to me like ...

stove is also that old. Its a Maytag model # M6131 CPA. The oven does not work and until recently, two of the three burners would light on their own. My wife tried them last night, and neither of them

...stove: Both the oven and the broiler will ignite, but only stay on for a few seconds. It does not try to reignite. Is this the control module? Most modern ovens use an electronic control board to ...

...stove in my camper that did this. The answer was to let the flame burn for a few minutes BEFORE closing the door. I think the original problem is that there is too much gas flowing to the burner and ...