Questions & Answers for: stop time ge profile range

...stop working Our oven self cleans, once that was over, we could not get the oven programed back to normal operating standards. The LCD has a P7 on the screen and my brother -in law was able to reset ...

The gentlest clean will in time not stop this from happening. You can get some hi temp touch up paint to make it look better, however it will keep doing this, espically on the burners you use the most

ge it would have a glow bar ignitor, either a flat rectangle shaped or a round ignitor. That is want the problem is 95% of the time. It is pretty easy to do. The floor of the stove will come right out

GE Profile Convection oven - 3 buttons on the control panel stopped working - can I find schematics anywhere oneline? No schematics on line. Take the key panel ribbon out of the connection to the ...

...stop unless I unplug the unit You have a bad spark switch on one of your burner switches. Remove the control panel to access the switches and burner stems. Carefully remove one wire at a time from ...

GE Profile Gas Range Model:JGBP79AEV4AA When i turn on the oven the flow of gas is interupted and continues (sort of like stops and starts) oven does warm up to temp however takes a long time. Any ...

time; it has now almost two weeks since it started. is there any way to stop the f7 beeping? F0 or F7Shorted Clear/Off Key due to membrane switch, control or connectorShorted key panel membrane switch

...hit temperature. set at 400 it takes forever (1/2 hour) then gets stuck at 398 Replace the oven ignitor. (they get weak after a period of time, and will give those results, or stop heating

GE Gas Oven and broiler not working Both the oven and broiler stopped working at the same time. Is there only one igniter for both? No, there is a "hot-point" ignition for each but they are both ...

GE profile PT925SN4SS touchpad stopped responding. Power still exists, shows the clock. Power reset did not work. Beeps on for clock time to be set. Maybe one Button is stuck in on position Replace ...