Questions & Answers for: stitch setting elna su

...stitch selector is a wheel inside the flap on the top of the machine, on the air electronics, it is a coloured dial. If this doesn't help, check if you've inadvertently moved the needle position to ...

...stitch selector to 7, the cam setting. then turn the width to orange again (3-4) and the stitch lenth selector to the orange setting, right around the knob. This engages the "Elnagraph" the device ...

...stitch selector to 7, the cam setting. then turn the width to orange again (3-4) and the stitch lenth selector to the orange setting, right around the knob. This engages the "Elnagraph" the device ...

...Elna models?  If it is one of the two latter models, then you need to set the stitch width to zero, stitch length to zero to disengage the feeler arms that read off the disc.  Then press on ...

elna tsp air electronic 58 will not zig zag stitch Firstly will it sew any stitches that require the needle to swing from side to side? the serpentine stitch or blind hem stitch?As this machine is now

Elna SU models, the Star Series SU is white with a blue top panel. Or the air electronic SU is a white machine and a dozen years newer (80's). Both have a disc elnagraph reader in a flap on top of the

Elna SU buttonhole- I can't remember the order to set the dials for the automatic button hole function. Anyone know? Thanks sure, put on the buttonhole foot after putting a button into it and using ...

...stitch selector too, always turn width and length to zero first to avoid wear on these parts internally. If you are happy to delve a bit deeper into your machine internally you might want to join the ...

...Elna SU manual reads as follows, and the manual can be viewed on line at http://sewingonline.co.uk/instructions/elnasp/ First make a few trial runs with a scrap of material exactly as the buttonhole ...