Questions & Answers for: stitch free designs

...free motion stitch using the V1 stitch. It should pull only slightly to the rear so that no bobbin thread shows while doing free motion embroidery. Upper tension may be increased for balanced stitch ...

free motion on, select stitch 1 from menu V and drop the feed dogs. It also makes a big difference to use the straight stitch throat plate which just has a small hole for the needle to go through. One

...stitch, embroidery, or microtex needle will work. Install a darning presser foot (or a free motion foot, if you have one) on your machine (the darning presser foot is shorter in length and allows the ...

free-hand embroidery. Use the darning foot. Set the machine for a satin stitch with a stitch length of 0 and lower the feed dogs. Manually move the hoop to stitch your design. (Trace the design on the

...as far as stitching.  Always test stitch before stitching on your projectI have sew-what-pro but you can down load a 30 day 60 save trail for free.  ...

...free hand embroidery.  you lower or disengage the feed dogs, take off the presser foot.  Some use a darning foot and others just leave the foot off.  Hopefully your design is already ...

...How do you do free motion quilting? Hi, Free motion quilting is done with your programmed quilting stitches, Lower the feed dogs using the small white dial on the front of the machine behind the ...

...stitch in the ditch of your blocks. Free Motion Quilting Designs: The Free Motion Quilting Project Walking Foot: What is Walking Foot Sewing Tips for Beginners Stitch in the Ditch: Quilty How to ...

...free arm but remember machine has to keep up with you. If you go too fast you will be pulling the thread and probably will break the thread. 6. Your erratic stitch is caused by the speed at which you ...

...stitch files on the thumb drive. 8. Press and hold your finger over the desired file title, until it appears on the screen. Refer to page 108 and following of the EPIC Manual which can be downloaded ...