Question about Forest & Garden No.967012396 345 16" Gas Chain Saw
...low. Your high adjustment idle screw needs to be adjusted. Firefishin is right I have a Stihl 028 Woodboss chain saw and of had the same problem until i touch the low idle screw it sloved my
...Chain shows a range of bars for the 340 up to 20". I'd trust their expertise. Try http://oregonchain.com/selguide.htm. buy a stihl you can run a 20" bar but the saw is very under powered for this ...
...saw shop (Stihl, Husky, Etc), They do an inspection, change the plug, and adjust the carburetor. Explain your symptoms, ask for an estimate to repair & perform a tune up. If you do this ...
...you can. I di on my Stihl and had no problems other than it bogging down a little on a big cut........ it's got the same size same power head why not buy the bar/chain combo for this model it'll ...
chain saw has no power when trying to cut wood, bogs down and will die, If you did nothing to the carburetor adjustments, are using a fresh (3 months or less) fuel mix with the same oil/fuel ratio, ...
Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin
Stihl 192 MS, a climbing saw. I don't use it alot lately and its bogging down when I try to rev it up. It starts fine and runs on its own but when I try to give it gas it dies out. In order to restart
Question about 16" Chainsaw Bar Chain Saw 018 025 Ms 180 250
...stihl 028. The saw starts and idles nice. As soon as you throttle up or put it under load, it bogs out, It also seems a little smokier, Can ya help? I cleaned the carb and jets and exhaust screen.??? ...
Question about 455 Rancher 555cc 35 hp 20" Chain Saw
...chain saw teck and they tried everything even replaced the carb with one from a working saw they said maybe the after market part is different but i got a complete piston,ring and cylinder so why ...
...stihl 044, older saw and its not running properly. When I try to start it with the full chock, I get fuel ranning out of the muffler every time I try to start it. I take off the air filter and ...
Question about 16" Chain Saw Repl. Chain Model Ms290 -ms880
stihl chain saw runs full out without pulling the trigger? what can i do? pull choke to start, saw starts fine but acts bogged down until you release the chain break then the saw goes to full throttle
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions