The knob is broken The doorknob is broken, the spindle is stuck and I can't open the door can you give me an advice on how to replace it? youve probably solved the problem by now but i would use a ...
...sticky and may need a good nudge. Have one person push the door up from the bottom or top with a small pry bar or large screw driver. While this is happening, watch the hinges. They fit together like ...
...door has closed shut and won't open. Hinges are on the other side and I have removed the handle from my end and it appears that a spring in the inside latch has broken. Now you can put your standard ...
door handle with loose play tight to door but up & down movement Remove lock from door.The round part contacting door usually spins to accommodate different width doors. This will pull the assembly ...
broken key in dead bolt If you can take the lock off the door push a small metal piece inside the lock from the back to push out the broken key. If unable to take it off, get an old windshield wiper, ...
Question about 3 Ring Knobs - BP1586
STRIPED SCREWS IN DOOR TRYING TO REMOVE TO CHANGE LOICKS LATCH IN THE DOOR SCREWS STRIPED CN'T PUT THE NEW DOOR LOCK IN WITHOUT REMOVING THE LATCH You will have to carefully drill them out. Start with
...handle is its a single knob. Otherwise use a hacksaw or dremel tool and cut about 3/8" away from the door surface, once you cut through you can use a small punch to push the screw through the door ...
Question about 3 Ring Knobs - BP1586
...from outside Look for a small hole or slot on or around the handle, Push a pin inside to unlock it. If hinge pins are visible: remove them, shift door to hinge side, clear latch, open 2", replace ...
5 inches into mm 25.4 x 5
Question about 3 Ring Knobs - BP1586
...door handle on a hollow core door so the latch will close from the inside instead of the outside? I don't know the make of handle but it has a horizontal lever Most of the time all you need to do is ...
Usually answered in minutes!
8 Questions