Questions & Answers for: stich sew 2

satin stich scallops what settings do i use for the satin stich scallop? Elna Heirloom Edition 6005 stitch no. 29 "F "foot 7.0 width 0.4 length tension 2-3

...stich lenght on a juki ddl 553. Thank you I still don't understand this. I have acquiured a juki DDL 553 recently to discover I have no idea how to change the stitch length and that there is no ...

...to sew This means, Have enough of the upper and lower thread pulled to the back and hold for the first 2-3 stiches, Do this every time and it will become second nature and you will do it ...

sewing machine leaves gaps when stiching what can i do? Could be bcecause of 2 reasons 1) Thread might stuck in the shuttle. 2) Try changing the knob settings. best of luck :)

...stich length setting for this machine It is usually 2.5 or mid-way between 2 and 3. Set it longer - closer to 3 when stitching thick fabrics. Make a sample of the stitches by sewing on a folded scrap ...

The needle breaks after 2-4 stiches this could be lots of things, what are you sewing on? what is your stitch length set at and have you turn the tension? Don't turn the tension its more likely one of

...stich for gathering? http://www.singerco.com/uploads/download/3e3e5558857ed68836712ac8545abb48178772a5.pdf is the manual for your machine; look at p. 27. You want stitch 00, and then increase the ...

...it to sew stait stich Set the Stitch Width to zero and the Stitch Length to 2. You'll probably want to adjust the stitch length to fit your needs for your project but 2 is a good place to start.

...Lcd screen light up and I am unable enter a number of stich to saw. Computer system is completely paralysed. Only 2 stiches works without the lcd screen It's possible a computer component has

...Sew More Than 2-3 Stiches And I Notice it's Moving In The Wrong Direction When It Does Sew That Much... Page 17 shows the Reverse Stitch Switch. You only need 3 stitches in reverse to start and end a ...