Questions & Answers for: stereo receiver wont turn

...stereo wont stay on, goes off when a/c is turned on I have a kenwood stereo installed in my 2000 Hyundai Accent. Whenever i turn the a/c on in the car, or even press a button on the stereo, it turns ...

...wont... I just installed my stereo into my families boat. it worked for a good 10 minutes until i increased the volume. Once it hit a certain point, the deck turned off, and now it wont turn back on. ...

...wont turn on There are 2 powers for this stereo. The is a constant power (yellow wire) which holds the memory, then there is an ignition power (red wire) that turns the stereo on when you start the ...

stereo wont turn on with the ignition and also wont remember what it was playing ie what radio station it is on or what track it is playing on the usb/cd red and yellow around the wrong way switch ...

...stereo wont turn on i dont know what the my stereo wont turn on i dont know what the problem is but i need a wring diagram hook up the ground and twist the red and yellow together and hook that up to ...

...stereo receiver LBT-D159 is not working properly, does turn on, make a click sound when turn on volume, but get no sounds, also CD player does not recognize any disc My audio in wont work when ...

stereo wont turn on only red light is blinking stereo wont turn on only red light is blinking It sounds as if you are lacking accessory power to the unit. Insure that the red wire of the Pioneer unit ...

...stereo wont turn on , i just replaced my car battery and got a new one but now my stereo wont turn on .i checked the fuse it was good , i checked the wiring connected to the stereo it was plugged in ...

...wont turn on in standby mode.I reset the system reciver turn on but no sound in tuner and cd in but direct 8 channel input got sound tuner setting might be default only in stereo only. do you have ...

...stereo reciever that wont turn on. Standby light is on. Tried resetting it from the back but didnt work. Please advise A standby condition can mean a fault in the receiver. voltages in the system are ...