stereo system model no. SA-VK62D. Recently the remote does not seem to work anymore and there is a display on the system which says "REMOTE 1" whenever I press any key on the remote. I suspect that my
...stereo receiver/ DVD/ VCR modes only. My Magnavox TV has a audio output but I don't see a input on the receiver. VCR will not play ? See error message 1 displays. No error 1 listed in instruction ...
STEREO DISPLAYS AN ERR MESSAGE AND I CANNOT GET IT TO PLAY DOES ANYONE KNOW HOW TO SOLVE THIS PROBLEM. I WAS INFORMED OF A CODE TO HELP WITH THIS PROBLEM. DOES ANYONE KNOW OF THE CODE AND HOW TO IMPUT
error 4 on the display. How do I get to the player, I don't see any screws to take it apart. I just fixed my 2005 RX330 CD changer jam, and saved $800-1000. It was easy, if you first spend $6 at: http
...stereo doesn´t read them, it displays "Error Card" and sometimes appears de "SD" icon, sometimes not, but if I connect the SDHC card through a USB adapter to the usb front port it works! but ...
Question about Brisbane SD48 Car CD/ MP3 Player
displays the same message. Any suggestions? Easy fix - firstly, you'll need to remove the stereo to get to the serial number. Have the following tools ready, either: a) 2 metal rulers b) 1 metal ruler
...stereo displaying err 6 please explain, thank you Error 1.Battery inside CD Changer needs to be replaced. Error 2.CD error message. Mechanism has as eject problem or takes a long time to select CD. ...
Question about 1997 Malibu
...error message is displayed when other CD'd are tried as well than there is a problem with the CD player. You can try using a CD player cleaning kit. Its possible that the laser head is dirty. ...
...Error 2 in Stereo Aiwa CX-BK1 I can not insert o eject a cd in the stereo, the display say "mode error 2", what's the solution? Hello Reinaldomd, your failure originates in the ...
Question about AM FM CD DET FACE CAR STEREO
stereo warning wiring chk then reset unit MISWIRING OR CHKWIRING is displayed when there is a DC offset voltage detected at the speaker terminals ('+' and '-'). This is normally caused by connecting a
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions
