Questions & Answers for: steps choking

1995 Mitsubishi L300 Van 2ltr aspirated motor, Automatic choke revs extremely high on cold start, will not decelerate till engine is hot. How can I remedy this? If it's carburetor & has automatic ...

Ad

Question about Pro Chain Saw 46cc 20"

1 Answer

hartd to start when saw is warm Are you choking it? You shouldn't be if hot. If no clean the air filter and try again. Are you setting the fast idle? You should be. Better? If your start procedure is ...

Ad

Question about Pro Chain Saw 46cc 20"

2 Answers

Cylander keeps filling with gas when trying to start Extreme Flooding by Dolfoff Please follow this link, http://www.fixya.com/support/t3226410-no_spark_new_plug_but_continues_flood cursor down to ...

Question about Pro Chain Saw 46cc 20"

1 Answer

Blowing out gas at the start. Drained and filled with fresh gas mixture. Cleaned spark plug and srayed carb cleaner in hole. Pull choke pull cord , blowing gas out of carb. Stuck float? Buy carb kit ...

Question about Pro Chain Saw 46cc 20"

1 Answer

the engine is flooding while trying to start Clean the air filter and spark arrestor (muffler) Drain and refill the feul tank with mix less then 1.5 months old. Start Procedure Cold: Ignition on/off ...

Question about Pro Chain Saw 46cc 20"

1 Answer

It starts and runs but when you turn it off it won't restart. I think the warm start procedure in the manual is causing it to flood. Try it like this, if you continue having problems reply below and ...

Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin

2 Answers

could I please have the basic start procudure for the poulan 2375 Borrowed from a friend. won't completely turn over 1) Have fuel tank full of a mixture of 50:1 gasoline and 2 cylce oil. 2) Have bar ...

Question about Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin

1 Answer

m842 chainsaw wont start when hot My 3 week old Maculloch chainsaw wont start when hot I suspect your warm start procedure is the fault, the manual is not correct IMO. Any choke on a warm engine ...

Question about Chain Saw 20" Bar

2 Answers

How do I start rental model 96. have rental can't start Place the saw on full choke with the switch on. Pull the rope until it fires. Place the saw on half choke, and pull again, and it will start ...

Question about ZR10926 16 Chain Saw

1 Answer

Lost my manual. Forgot how to start the darn thing? Might it be beneficial to include a model number where the answerer cannot see the item in question? The embedded numbers (heading) are often ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...