Questions & Answers for: steering fails return

steering fails to return to center after making a Steering fails to return to center after making a left or right hand turn 01 Mercury Grand Marquis New shocks, alignment, tires, and idler arm. This ...

Ad

Question about 2005 Cobalt

3 Answers

...steering wheel return All of a sudden my steering wheel wont return when i turn a corner, have to do it manually. Power steering motor has been replaced under recall. Thought it was a suspension ...

Ad

Question about 2001 Windstar

1 Answer

...steering leaks are in the pressure hose but not always. Pressure hoses will have screw on fittings and return hoses will usually just have spring clamps or screw type clamps on the end of the hose. ...

steering pump return hose from the fluid container Put that hose into some plastic tubing & into the empty bottle Remove the injector fuses, so the motor gets no fuel Crank the motor & the old

...return valve failed (all the fluid is being uselessly returned) - steering box control valve failed - steering box seals failing After checking that the drive belt is tight enough, and looking around ...

Vauxhall Meriva 1.6 8v 53 plate power steering problem Yesterday when I got in the car the Power steering light was on the dash board and steering was solid. I drove the car a couple of miles parked ...

Power steering failed in my 2007 pontiac gt, during extreme cold? The steering returned when I restarted the car. Have you checked to see if its under recall? They released one for power steering back

Why ford f150 4x4 2004 steering wheel is tight and getting worse your power steering pump may be failing, the system is restricted check for clogged filter and check pump pressure, the steering gear ...

...steering won't return when cornering changed the steering pump still the same any ideas please Steering stiff, changed steering pump,after I changed the pump and fluid it was ok for about half mile ...

steering system. There is a known problem with the return line coming out of the reservoir. The clamp that is on there is not good, and will drip fluid, leaving your PS pump dry. Clean up fluid, add a

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...