...steam (iron works fine) I have had this iron for 5 months and only been used 4 times. When I turn it on , there is water leaking out of the iron and the handle is too hot to touch after a few ...
...STEAM COMING OUT....IRON IS HOT AND WATER IS HOT, BUT PUSH SWITCH FOR STEAM??NOTHING COMES OUT you need to use a descaler, the holes have become clogged. you can buy this in most hardware stores ...
...handle from front to rear (gently to not scar up the works) and lift. Steamer not working?...is it getting hot? Steam building up in the boiler? Need a little more information here before I can ...
...steam iron alas we've had the same problem since day one, just opened it up, must be the boiler unit leaking at the start to emit the steam so the handle gets hot and now the seal is totally gone it ...
Question about i30/120V Professional Steam Iron Head Only, Aluminum Soleplate, 32 Steam Chambers, 7 Foot Cord, Hose for i500, i700 Boilers ITALY
steam out of the iron. I've tried the troubleshooting steps in the manual multiple times but still very wet steam. I note that there is a "thermostat 271 w/ manual reset" in the parts list for the
Question about i30/120V Professional Steam Iron Head Only, Aluminum Soleplate, 32 Steam Chambers, 7 Foot Cord, Hose for i500, i700 Boilers ITALY
...steam iron TDS25, and the handle of the iron is getting red hot and water is coming out of the back of the iron. Help!! Steam irons become clogged from water deposits. You may clean your iron with ...
...iron steam button is not set into perminent steam function. leaving the iron with the point of the iron pointing upwards should reduce steam to the handle. also the iron may need to be descaled to ...
handle on my steam iron is too hot to touch the handle gets way to hot and i need to wear gloves to iron Could be a hidden recall. I'd check MFG website, or email their customer service.
Question about Steam Generator EP8001 Iron
...steam generator iron. When in use the handle gets really hot. I have to put a cloth around it to use. Help. try to reduse the temperature setting first, if it still does the same then the thermal ...
Usually answered in minutes!
202 Questions
119 Questions
145 Questions
74 Questions
82 Questions