...station. 2. Press the MEMORY button. The MEMORY indicator will flash for 8 seconds. 3. Press the desired Classified Memory button (one of buttons A to F). The station is memorized in the selected ...
...station in a preset memory which already has a station, the current station will be cleared and replaced with the new station." ...
...station in a preset memory which already has a station, the current station will be cleared and replaced with the new station." ...
...station. Press and hold in the Memory button for a few seconds, then release (the Memory readout should be flashing on the display). Press the Memory UP or DOWN button until you have the desired 1 ...
...station and press and hold the burton number #you wish to program it on It sounds like you have not connected the B+ Battery backup wire so it retains all memory (radio stations & CD track info). ...
station, press & hold the play/memory button if you'd like to save another station, then repeat steps 1 & 2, then press the play/memory button again until P02 pops up, repeat step 3. to listen
...station in memory 10, tune in station, press the Memory button, then press 1 followed by 0. you must press them within a couple seconds of each other, or the first number pressed will be the memory ...
...memory buttons (F). The station setting begins flashing in the LCD display (G). Continue to hold the button down until the flashing stops. The memory button is now set. 4. Repeat steps 2 and 3 to set ...
...station memory buttons described under How to tune radio stations. HOW to tune radio stations There are four ways for you to tune in a particular station. You can use the "TUNE", "SEEK", 'SCAN"or ...
Question about 1996 Continental
station in one of the memory banks, first tune to the desired frequency (AM/FM band). Press Memory on the receiver. The memory light will flash for 5 seconds. Press the A/B/C/D/E to select the desired
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions