...bass frequencies of the speaker from subwoofers. thus, your other speaker sometimes recieve too much frequency making it sound dull or too static. feel free to post any questions that you have thanks ...
...static is the metal and plastic or your car "rattling" against each other when bass shakes the area around your speaker. If that's the case, you just nee to put something in there that surpresses the ...
Question about P4M800PRO-M478 Motherboard
...bass. Make sure your LINE IN is DISABLED. It may be causing this static feedback. You may have blown your speakers by playing sound way too loud. You may need to buy new speakers. Thank you and Good ...
no am/fm? are antennas connected? is there static active on any station tuned to? in terms of low bass response- double check settings both in the receiver and also on the sub itself if any available
...putting out bass sounds like static the cone isn't damanged at all but it sounds like a ball shacking inside the sub. what might be wrong? Bring the speaker to a technician and have the coil
...<<<<<<<< The bass unit could be too far from the soundbar to get a good signal. Try moving it closer. What is the source device that results in static? How is it
Question about Mesa/Boogie 2x10 Vintage PowerHouse Bass Speaker Cabinet
static in my 8/10 mesa cabinet. Its only in the second bank of speakers. The speakers seem to work and sound as good as the others in the cabinet but there is a weird light static sound that comes out
...Bass setting and knocking on Sub- Woofer. I have checked all connectors which are ok. Also I have tested with another input device. Any ........Suggestion try swapping the speakers around if the ...
Question about HK395 Computer Speakers
...static noice Harman Kardon HK395 sub woofer with satalite speakers. Music tracks seem fine, its when watching movies the sound is really loud on areas where theres lower bass noises hi G, Yes it is ...
Question about HK395 Computer Speakers
static when you turn any of the knobs on the amp? If your bass and cable are in working order and there is no noise at all when you turn the volume to 10 or a bunch of popping/static on your way to 10
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions