Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...starter but won't crank craftsman lt1000 check and see if the white wire on the starter solenoid has voltage when the key is in the start position. If so, the solenoid is bad. If not, back probe wire ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...LT1000 craftsman riding mower will not start, good battery, checked gas lines and will start with starter fluid for short period of time. any suggestions? Pull the carb. and rebuild it I think you ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...starter: got a new one & replaced it ... same problem. What else can cause this problem. I have a Craftsman LT1000 - Tractor has been great no problems for last 5-6 years however; this year It ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
lt1000 17 hp . problem: starter will not turn engine past compression stroke. changed starter and bypassed switch and connected car battery to starter, same result. any sugestions. also spins fine ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...LT1000. The starter is turning but just hums . Is there a gear on top of the starter that could be loose. Also can I use a rope to start this model did you have the battery disconnected? beleve it or ...
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
i need craftsman lt1000 owners manual my starter works if it is jumped from battery direct but not if i turn the key Check your fuse.
craftsman lt1000 manual got fire getting gas but still wont crank check starter solenoid
sears troubleshooting LT1000 starter is getting red hot to touch?? Sounds like its no disengagin after startup. Could be a shorted switch.
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
not start. Full charge. Occasional click. How do I check ignition, seat, brake switches, solonoid, & starter? Craftsman LT1000 19.5HP B&S. Check battery connections for tightness and lack of corrosion
Question about 17.5 hp 42 in. Deck Lawn Tractor - CA Model
...LT1000 A starter solenoid is only a elecro magnetic switch, so a 12v supply to the low tension terminal of the solenoid will cause the unit to energise and connect the two sides of the high tension ...
Usually answered in minutes!
1,998 Questions
1,006 Questions
778 Questions
1,057 Questions
700 Questions