Questions & Answers for: starter hangs

...starter and get at the wires while it hangs!! Try undoing those wires from the wheel well wall and then drop the starter! but of course do disconnect the positive wire from the battery! also you may ...

starter problem starter wire is hanging from the wire harness how can i fix it and the car wont start . Disconnect battery before attempt to re-join that is a live hanging wire might cause a good ...

...starter still sticks What next? Sticks as in Hangs in flywheel - or sticks as in stays on? 302 has several starters. Some with subtle differences that shops and parts stores often mix/confuse. Wrong ...

...not turn over, replaced battery, battery cables, had started checked. Just get a clicking noise at starter like a dead battery. Will start some times. Sounds like a bad connection. Clean all the ...

...hangs will not trunover until I hand turn the flywheel,than motor/starter works fine. It also kicks back when just about stopped and has now damage starter. How can I fix it from hanging on TDC? Hi ...

...hangs will not trunover until I hand turn the flywheelthan motor/starter works fine. It also kicks back when just about stopped and has now damage starter. How can I fix it from hanging on tdc? This ...

...to start a motor but engine already going, what do you suggest it could be? Check to see if your starter is hanging up and still running. After you get the engine started, feel and listen closely ...

Tried to take starter off of a 1995 cadillac deville but the starter is just hanging and won't come off. What could be making the starter hang? wiring bracket, or support bracket

I have got the starter diconnected from my 2005 5.7 jeep gc but I cant get it out to replace it 1. Disconnect and isolate negative battery cable. 2. Raise and support vehicle. 3. Note: If equipped ...

...hangs when testing it then its the starter and you can get another 1(or could have a bent shaft in it not letting the head to slide back),if starter if ok then it might be in need of some shims to ...