Questions & Answers for: start 2000 buick lesabre runs

LE SABRE 2000 3.8 LITER. CAR RUN BUT ONLY WITH LIMITED HP.( NO MORE THAN 35 MILES P/H)CHECK ENGINE SOON ,LIGTH ON.-PROBLEM START SUDDENLY YESTERDAY,AFTER FILL WITH GAS DAY BEFORE 3-30-09 Water in fuel

2000 buick lasabre out of gas. put gas in it, and it will not start. at first i did not hear the fuel pump, so my husband checked the fuses. they are fine. after about 10 ten i heard the fuel pump but

2000 buick lesabre runs rough. It started running rough and the I drove it around for a while and it was okay for several weeks and then started running rough again and staying that way. First I would

...2000 buick Lesabre and was driving home from work, 30 miles later at a stop light the engine started losing power. Started like sputtering.... it cleared up and was fine another 6 miles and suddenly ...

...2000 Buick LeSabre starts but idles very rough and stalls. After restarting a couple of times the idle eventually smooths out and the vehicle runs fine. Only trouble is on cold starts (after it has ...

2000 buick la sabre was working very well. it sat 2000 buick la sabre was working very well. it sat for about an hour after getting gas and then it wouldn't stay running. It would cough and buck and ...

...2000 Buick LeSabre and when i turn it on it sputters and skids when I start speeding up and my gas is running out in less amount of miles what might be wrong with it? have scanned if light is on. a ...

...start I have a 2000 buick lesabre limited with 181000 on it and everything runs great except when you start it. It has never not started yet, but it cranks two or three times hard and then fires and ...

...buick lesabre and it will die when idleing, it also cuts out when go to excelrate, but as long as I keep my foot on gas and brake it will not die. It is also running really ruff. Could when engine is ...

...2000 Buick LeSabre 3.8 barley starts but when it start it runs rough how could I fix it and why is it running so rough? I have changed the gas filter I have used a computer to look for codes and ...