Questions & Answers for: Microsoft standby power

be a dropdown menu in the "Power buttons" >area. From there you can make your computer perform a lot of power management functions >including Standby and Hibernate. [Reply or follow-up to this message

...but didnt work my problem has nothing to do with "power options" because neither option Hibernate Or Standby is there, thank you This is usually because your OS didn't recognized your monitor

...standby: Open Power Options in Control Panel. On the Advanced tab, under When I press the power button on my computer, click Standby. Hi, Click on the start menu and select run. In the box type ...

...power to console? Mine has an orange light and works fine. i think that's standby mode. it turns green as soon as the 360 powers up. try replacing the power cord that goes from the 360 back to the ...

...Power saving option to "never" standby, but no luck. It seems to be a security issue but I cannot find any setting. go to control panel and open power option, change your power scheme and all the ...

standby power (If the short was on the switched supply, the 360 would power up then flash 3 red lights with error 0001 or 0002, or power up for a split second then shut itself off). Also measuring the

...Standby. Push power On Button, should turn green. No Light At All Check Plugs Fuse. Orange light On, but not turning on, or going to Green, power Up. Suspect Faulty Power Supply Unit, Or Motherboard ...

...the power schemes TAB, on the bottom is says System Standby, click the down arrow and select the time you want your computer to go into Standby, I set mine at 15 minutes. Click Apply, then Click

...standby mode to be able to power up pc and use it First, how do you know it's in standby mode? I would turn it off and disconnect from the power source. Then plug it back in and try to start it. If ...

...standby mode. If your PC has a 'reset' button (usually located near the power button), press it. Your machine should reboot. If it doesn't or if you don't have one, you can try pressing and holding ...