Questions & Answers for: stand fpr

...Also pull the boost pack and reduce fuel pressure and see if fault still exsist. Is the car running standed ecu? Just wondering if you know how to set the cam timing and cam settings for a 1800 GSR ...

Ad

Question about 1989 Corvette

1 Answer

...stand on the passengers side, and stare towards the back of the plenum just in front of the distributor. Now look underneath the upper plenum, and attatched to the lower manifold at an approximate 45 ...

Ad

Question about 1998 C3500

1 Answer

help where is the fuel pressure switch Standing in front of vehicle looking in towards the engine, right side, driver side rear(just to the right of the distributor), but you need to remove your upper

Question about 2005 Corolla

1 Answer

...the rotors? how do you remove the rotors fpr a 2005 toyota corolla? jack up your car and put on stands remove wheels then look at the brakes,look behind the calipers there will be a bottom and

...take your remote to the recvr and look on the back of the recvr to make sure the uhf ant. is standing straight up if not, straighten and try remote functions. if you stillg et no responce

Question about 1992 Mercedes Benz 300 Class

1 Answer

...from valve cover to air cleaner, the small vac line runs from there to the FPR. These next are standing in front of the car: Intake manifold lower outer runs to EZL Intake manifold lower inner ...

Question about 1992 Mercedes Benz 300 Class

1 Answer

as it doesn't seem to be the FPR. LEAK IN GASKET ETC PLACE ON CURB THEN STAND SO BACK WHEEL IS ON CURB FRONT NOT PUT ON KICK STAND REV IT UP HIGH LOOK FOR OIL FROM GASKETS ETC REPLACE UPON FINDING

...Stand by the gas tank and have someone cycle the key to on if you need to. If you hear nothing from the tank, you need to investigate the fuel pump and it's circuit. There will be a fuse for the fuel ...

...or a stuck converter clutch. Try jacking up the front wheels, place the front of the car on jack stands, set the parking brake/ chock back wheels, place the transmission in neutral, start the car ...

...stand everything is ok The computer was put on another machine and it works without problems what could be causing the crash? yes, when I raise the speed from the exhaust pipe, black soot splashes a ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...