Questions & Answers for: spreading brake caliper

Question about 2004 FLHT - FLHTI Electra Glide Standard

1 Answer

...brake pads on a 2003 Harley Davidson standard electra glide? Remove right saddlebag, pull the two caliper mounting bolts and remove the caliper. Do not open bleeder or disconnect line. You will need ...

Ad

Question about 1998 V70

2 Answers

...brake. They retract just like the front caliper pistons. You can push them in by hand although a tool to spread the pads apart is quicker. You have to grab the caliper and rotate with some force to ...

Ad

brake caliper to spread open so that the new brake pads will fit back on the rotor. Is there a special tool I need to compress this caliper? Hello, normally a C-clamp is used to push the caliper back,

...brake caliper will not spread open. trying to change brake pads The front calipers compress in but the rears screw in - you need a caliper piston tool. Order a good one from www.GermanAutoParts.com - ...

Question about 1996 Grand Cherokee

1 Answer

...you need to spread the brake pads from the rotor with a screw driver, if the caliper doesn't move, open the bleeder valve and spread the pads from the rotor, then you will need to bleed that ...

Question about SSR 110CC Pro Beginner Bike

1 Answer

cannot install front tire because the front brake calipers will not open up With the tire not installed, push the brake calipers together and release the brake cable from one side, this should allow ...

Question about 2008 Grand Caravan

1 Answer

I am changing out the brakes on a 2008 Dodge Caravan SXT 3.8 V-6 and I Have changed out the front brakes by use a "C-clamp" to compress the calipers Then I went to the back brakes on both ...

Question about 2000 Alero

1 Answer

BRAKE CALIPER! ON THE BACK OF THE CALIPER IS TWO BOLTS (POSSIBLY ALLEN HEAD BOLTS) REMOVE THOSE TWO BOLTS, AND WIGGLE THE CALIPER! YOU'LL NEED TO SPREAD THE CYLINDER INSIDE WIDER TO ACCOMODATE FOR THE

Question about 2002 Grand Prix

1 Answer

...calipers, spread and lift off calipers, remove pads compress caliper piston with a c-clamp, be sure to have the brake fluid cap off the reservoir under the hood. - replace pads and reverse the

Question about 2003 FLHR Road king

2 Answers

...the weak lever. Remove caliper from the fork leg and clean pistons with a brake cleaner. Spread the pads back apart and reattach caliper to the mount. Pump the lever and you should be good to

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...