Questions & Answers for: spool decor sewing machine

...spool? If you are using a decorative thread such as sulky, you might want to reduce the thread tension. Machine: If you've had a needle hit there may be a burr on the machine, or the machine might be ...

...machine. This problem was all of a sudden and not after a thread jam. If anyone could help me figure this out I would greatly appreciate it. To answer exactly, I need more information. Is anything ...

...sewing machine I want to sell my 1991 Janome New Home Memory Craft 8000 that's in excellent condition. What should I ask for it? I have purchased several extra cassettes for embroidery, have many ...

...stitching, you cannot do this on a serger. You can achieve the effect by using a twin needle, two spools of thread, bobbin and a straight stitch. Make sure the double/twin needle will pass through ...

...sewing but the thread keeps breaking , can anyone help. I am new to the machine & embroidery thread Three things to check: 1.You need to use a needle specifically made for metallic thread. I ...

...under the presser foot when starting to sew 6. the threads were not drawn to the rear after sewing 7. The thread is either to heavy or to fine for the needle 8. Try a different spool or cone of ...

...spool of thread with another one. Then rethread the machine very carefully and try again. Try adjusting the tension from the highest to lowest setting to see if any setting will produce a balanced ...

......