...turns very slowly does not speed up when peddle is depressed, Try oiling all the moving parts with WD40, old oil on the machine may have congealed, make sure there is no thread stuck in the
Question about 1120 Mechanical Sewing Machine
The hand wheel will not turn. I have no idea what happened, got any ideas? Usually it is a bit of thread stuck in the raceway area, take the raceway and bobbin case out and have a good look.
What or where is the raceway on a Bernina730 The raceway is the part that the bobbin case sits in, also known as the hook.
how is it mounted I THINK YOU CAN BUY U SHAPED CLIPS WITH A HOLE IN THE MIDDLE THAT YOU ATTACH TO THE WALL WITH TOGGLE BOLTS OR SOME OTHER TYPE OF FASTNERS. A 10 FOOT LENGTH SHOULD BE SUPPORTED TW ICE
does the ivory cover snap over the metal track or does it only slide into place? I have no idea - I've never seen a more incomplete customer Q&A site
Question about Raceway V700 Surface Metal Raceway Cable raceway
Needle not dropping to fabric. Wheel will not turn to get it there. Probably thread jammed in the raceway area, take the raceway out and check
Question about Raceway V700 Surface Metal Raceway Cable raceway
i have a tread wrapped around inside the threading mechanism. I need to see a diagram to tell you what the thread is wrapped around. Chances are it is wrapped around the raceway area, take out the ...
Question about Raceway V700 Surface Metal Raceway Cable raceway
Can't find instructions manual for MEGA BLOKS 96430 STREETZ RACEWAY I have mega bloks streets raceway 96430 and don't have the instructions. Can someone please help
Question about Tonka Raceway
game fixers plese fix tonka raceway is a game on dvd thats a computer game come to 1st bridge grove No!
Can you run same phase 20 amp circuits in a 3/4 pipe? Yes. Is this a trick question? Annex C of the NFPA's National Electrical Code deals with conductor fill (starting on page 70-745) of raceways. ...
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions