Questions & Answers for: speed queen washer water valve

...Speed Queen AWS53NW When the washer is filling up with hot water, the water actually ends up being cold or lukewarm, not hot. Hot water does come in to the washer but then the cold water kicks in. Is ...

...speed queen marathon top load washer. When doing a warm wash, the water in the drum is cold - is this because the hot fill is from the hot water tank but the cold is off the mains? (The hot wash is ...

Speed queen Marathon top loading washer- Water leaks into drum when not in use??? Shut off valves in the basement. The problem is the water inlet valve has failed. There is a video on checking this at

...Speed Queen top load washer and while filling with water, it does not stop without opening the lid. I have replaced the pressure valve and checked the hoses and still no fix. Any ideas? try checking ...

...speed queen washer the valve filter is blocked up turn off the hot water supply and remove the hoze from the machine end valve inlet in the inlet is a small filter remove it and clean it if its not ...

Why does the water not stop running in on my speed queen washing machine Water valve is bad

is there a solenoid on the block of the 1.7d 2003 we have no idea what you have the question shows speed queen washer water valve

speed queen washer over filling? probably needs the water inlet valve assembly while washer is overfilling unplug washer see if it still is filling if it is that is the problem.it can also be possible

...speed queen is vert slow I have a heavy duty speed queen washing machine and it now takes ages for the machine to fill up before starting a cycle. Could there be a blockage The to ensure that the ...

Speed Queen Washer. Water trickles in very slowly even though water pressure is ok If pressure is OK, the fill valve could be defective.