Questions & Answers for: speaker glue

Question about Resolv Sub88 Subwoofer

1 Answer

...speaker is black) mat spray.First put some glue around the rip wait for 10 min and then put the bandage on it.After that again 10 min of waiting and new layer of glue on the bandage.Let it 24 hours ...

Ad

Question about M1-Active MkII Main / Stereo Speaker

1 Answer

...speaker is distorting, i think that i may have a small tear or loose glue somewhere on the cone. how should i fix it? Peace First try swapping the leads on your source, powering the left speaker with ...

Ad

Question about BA735 Computer Speakers

1 Answer

name of the yellow glue what is the name of the yellow glue used to secure plastic parts to the front metal panels of stereo components It could be epoxy resin glue or if the glue it is slight elastic

glue gun; Have patience. Use a sewing needle to pull the front grill of the speaker, carefully by the edges. Do not pull too hard, go pulling around the screen to prevent warping. Loosen the two small

glue gun; Have patience. Use a sewing needle to pull the front grill of the speaker, carefully by the edges. Do not pull too hard, go pulling around the screen to prevent warping. Loosen the two small

Question about MMS 321 Computer Speakers

1 Answer

...speaker then I would use Bear Glue it is the strongest you will need something good to hold it together during vibrations. I use this glue for everything. Let it dry for 24 hours before any use. A ...

Question about S15L7 Car Subwoofer

2 Answers

...GLUE SPEAKER BACK TO BASKET It sounds like your speaker surround blew away and separated from the speaker cone and/or housing. I'm in the process of fixing one my speakers by replacing the ...

...speaker it still work but the base part that hold one of the snaped it still work but it can't sand up what soud I do or what glue can I use There is a fast setting glue 'Super Glue' use ...

Question about Tarantula T2-15 Car Speaker

2 Answers

...that every company uses to make the speakers they also said sell the threading and everything well one second I'll go look at the name of the glue because I have some from my speaker it worked ...

Question about Tarantula T2-15 Car Speaker

1 Answer

...speaker cone is depending on the material. If it is paper cone, it is very easy by using paper that you glue with wood glue (White water based glue) on to the cones rear side (for estetic reasons). A ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...