dewalt xrp 18v drill I was putting a screw into some metal on the inside door panel of a truck, and I heard a pop. I think I saw a spark, but it happened so fast. This was a brand new drill, and now ...
...Dewalt cordless drill. I noticed two things that I don't understand. I can see sparks inside the housing vent slots when it is running. Also it makes a "clunk" noise and feel when it stops, like it ...
Question about 18 Volt Compact Drill Kit
...Dewalt 18v cordless drill and noticed two things that I don't understand. I can see electric sparks inside the housing when it is running. It is inside and can be seen through the vent holes. It also ...
...Dewalt 18v cordless drill and noticed two things that I don't understand. I can see electric sparks inside the housing when it is running. It is inside and can be seen through the vent holes. It also ...
...dewalt drill. they have an exploded diagram and parts listing for each model drill. That will identify the brush for you if you have never seen one before. If the drill was operating intermittently ...
Question about DC727KA 3/8" 12v Cordless Drill/Driver Kit
Dewalt cordless Drill/Driver DW959 When using, it sparks and then starts to smoke out of the vents, can it be fixed or should it be replaced. It is about 5 years old. should just be a case of ...
dewalt dc925 hammerdrill. When running the drill I can smell an electrical type smell. I have taken the drill apart and cleaned it which has seemed to help a bit. I also see sparks when first starting
Question about DC720KA Heavy Duty Cordless 18 Volt Compact Drill/Driver
sparks fly when in use and over heats. What part do I need to replace? brushes on the motor would be my guess
DEWALT XRP 18 VOLT DRILL STARTED SMOKING WITH AN ELECTRICAL SMELL AND VISIBLE SPARKS VISIBLE IN THE BACK VENTS. sounds like you need a new motor, you can buy one from dewaltservicenet.com or ...
Question about DC920KA Heavy Duty Xrp 18V Cordless Drill/Driver
...drill smells like there is an electrical problem, but seems to work fine. Also sparks inside motor housing. I have heard that this is normal due to the electric brake in the drill, however, I am ...
Usually answered in minutes!
227 Questions
165 Questions
160 Questions
104 Questions