Questions & Answers for: spark plug poulan pro chainsaw

...spark plug I have a Poulan pro 4218 that has only a few hours on it. Ran fine yesterday. Today will not start. Checked the spark plug... No spark. Replaced the spark plug... still no spark. New Saw? ...

...spark plug,but when i put the plug back in i get nothing If you have spark and compression it must not be getting fuel. Put a little mix directly into the carburetor and try to start it. If it pops ...

proper spark plug gap for poulan chain saws I believe the proper spark plug gap for poulan chainsaws is .025-inch. That goes for all units.

I have a 18 in poulan pro that want run. has new plug, air filter,gas filter Check if is any "spark" at the spark plug.If not change the "coil" =spark plug cable and coil all are together.

where is the spark plug on a poulan pro 42cc remove the top cover i think 4 screws the plug is under there 

...to run and verify you have good spark? A 2cyl engine must have compression, fuel, and spark if you have all 3 it will start, if it won't start check fuel filter, air filter, spark plug or old fuel ...

spark plug (make, number) can I get for a Poulan 2025 chainsaw and what gap? Replace with Champion CJ-7Y or RCJ--7Y spark plug and tighten securely with a 3/4 inch socket wrench. Spark plug gap should

what is the spark gap for 221 pro 40cc what is the gap setting for a poulan 221pro 40cc dura chrome chainsaw 14 inch blaide The gap for all Poulan chainsaws, regardless of the spark plug used, is .025

spark plug gap setting poulan pro 033. .025" plug gap

search?q=poulan+pro+405 .. Fundamentals... fuel, compression, spark. Does it have spark? Does it have compression? After a few pulls is spark plug wet or dry? If dry, no fuel. If wet, possibly flooded