Questions & Answers for: Sharp no sound tv Televison & Video

...tv, I lose surround sound. Any ideas? I'm stumped. Try running the optical TOSLINK cable from the TV to the receiver. If the TV doen't have a digital optical output, then try going into the menu on ...

Ad

Question about AQUOS LC-42D85U 42 in. LCD TV

1 Answer

TV with NO SOUND (but perfect picture) We just purchased a Sharp LC 46D85U TV from Best Buy. The set-up was easy, but when we turned the TV on, the video works but there is NO SOUND. We have tried all

Ad

...sound on sharp tv flat screen model LC when turning on again re sharp tv flat screen model LC 19SB25U problem: no sound when we turned on the TV this afternoon; had sound when we turned it off last ...

Question about AQUOS LC-42D85U 42 in. LCD TV

1 Answer

...tv to use surround sound The way to turn off the tv speakers is to press the menu button scroll to the option category navigate to output select and choose variable. However just turning off the tv ...

Question about AQUOS LC-42D85U 42 in. LCD TV

1 Answer

TV. The sound should be set to fixed, not variable. Variable means you control the sound output from the TV which controls the sound from the Bose. Not Good. Sound quality is not as good and confusing

Question about Aquos LC-42D62U 42 in. LCD HDTV

1 Answer

...sound from the TV, then it is not so." If none of the above seems not to be the cause of the problem, then the above troubleshooting has confirmed that the TV has got a defective sound card/ic. The ...

...TV sound or what? If properly connected by way of a set of rear audio/video or component jacks to the same on the TV--you should if change the TV input to that location see the blu-ray and hear sound ...

...cable? i have tryed rca cables,no luck. You have to setup the sound to go to the aux out on the TV. Either digital, Optical or RCA in order for the TV to route the sound to the correct output

...tv only displaying channel number and sound -no raster. using video mode displays are ok. sound is also ok.the model is 20v-j50m When tv is powered on tv only displaying channel number and sound -no ...

Sound still on TV. If your Sharp LC-45D4CU television is not producing sound when you connect an external speaker or sound bar to the audio out jack, there are a few potential causes and steps you can

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...