Questions & Answers for: sony lcd turn itself

Sony Bravia turns off by itself My TV turns off by itself and the standby light starts blinking. You turn the tv back on and within 3 seconds it happens again. Replace the BU Mount pcb. Sometimes they

Sony BRAVIA KDL-40XBR3 turns itself off within 5 seconds after I turn it on. The red STANDBY light flashes 9 times after it turns off. How can I fix this? sony 52 inch tv in stand by mode comes on and

...after 5 seconds...blinks 7 times? SONY TV turns itself off after about 5 seconds. The LCD light then blinks 7 times. Had the same problem. Unplug from wall for 36 hours and then it works. Hp Sydney ...

...Sony LCD model #KDF-E55A20. Help it was just taken out of the factory box six months ago I had it and bought it brand new a couple years back. This Unit is a LCD Rear Projection and most likely the ...

sony LCD tv. The screen shuts 40xbr2 bravia kdl sony LCD tv. The screen shuts on and off randomly on all video(cable dvd,s playstation). I have tried the factory reset and still the same problem. Took

...power sony KDF-E50A10/4 tv turns itself off after 2 minutes. the power light starts blinking Hi... Main power supply is overheating. Try getting it dusted out first then check into getting it ...

...sony bravia lcd tv turns on then gets to the sony logo and turns itself off - can u advise please there is problem with your tv power supply.there is main filter capacitor problem.check and replaced ...

...Turn on your Sony Bravia. Press and hold the Up Arrow button on the remote control Press the Power button on the TV while still holding down the Up Arrow button. The TV will turn off and then turn ...

Sony Bravia LCD tv model KDL40S4100 won't hold settings. I have a Sony Bravia KDL40S4100 TV and everytime we turn it on it wants to go through the set up and scan channels. We go through the set ...

...Sony LCD tv its turn on and show me soney logo for few second and turn off screen but green light is still on. what can i do? Any other indications? It looks like it turns itself into 'stand-by' ...