...drive belt for the carousel fell off. I have since replaced the drive belt and have gotten the carousel to close most of the way, but was wondering what the correct gear alignment scheme is. Can you ...
Sony CDP-CX300 CD won't play The unit acts like it is trying to load the cd's but never plays. When I try to skip a cd or track or even open the door, nothing but flashing blue light. If I turn off, ...
Sony carousel CD player skipping. The problem appears to be a problem with the mechanism that grasps the CDs. The mechanism grabs the CD but does not hold it tight enough to spin properly (it slips). ...
...Sony. I have the same unit apart right now and although by now you've likely figured it out, I don't think there is a third longer belt, the carousel is gear driven by one of the short belts and a ...
carousel will not turn pull off changer cover, theres 9 screws .looking from the front of the changer, look to left side,thats where there are belts for drive mech. the back one is for the carosel, it
Question about MegaStorage CDP-CX355 300-Disc CD Changer
...drive starts to close, and closes about 90% of the way but does not quite make firm contact with the CD before stopping. Then the pickup arm then returns the CD to the carousel and releases it, and ...
Question about MegaStorage CDP-CX455 400-Disc CD Changer
...SONY CDP-CX455. NEED THE PART NUMBER FOR A DRIVE BELT WHICH TURNS THE CD CAROUSEL AND WHERE CAN I GET ONE if you have the old belt, take it to ace hardware and get an o-ring the same size. it will ...
Question about MegaStorage CDP-CX455 400-Disc CD Changer
Player won't play discs.. Removed cover, little carousel motor belt wrapped around shaft. Untangled and put back on pulleys but seems loose motor rotates but carousel barely moves take the belt to ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions