...something? Is there anything else that needs to be adjusted? Any help will be greatly appreciated. Thanks. Rich K It could well be that the arm needs a re-wire. There could be a bad connection or a ...
...poor gas mileage -rich, gas mixture and also cause a soot-black looking exhaust ,to check if cat. is back you can simply unhook exhaust before it reaches the cat and see if it will stay running then ...
...poor drivabilty, this can lead to other problems with the Catalytic converter becoming damaged. I'm not sure how the engine runs at this point, but I thought this was worth mentioning. Something is ...
something I don't need. the computer will give a code if its bad the codes related to the map sensor is PC0106,0107,0108 First thing to do is to pull the codes than take it from there. The symptom you
...poor fuel milage. the sensor sends info to ecm, and if it sends wrong info it will not run right. check for coolant leaks and check the fan relay, it maybe going bad. Another simple relay test is to ...
...something else? Replace the MAP sensor you need to test for proper voltages at the map sensor plug terminal and for a poor connection.the other thing to be taken into account is how the car was ...
...poor mileage? I had a 98 Ford Explorer. It was a pig on gas since I bought it, and it was only 2. I kept this truck for 6 years and when I got rid of it and bought a full sized chevy, I thought about ...
...poor performance. If the jetting is too small the result will be a lean very hot mixture, which can cause overheating of the combustion chamber and melt down damage to engine component parts. ...
Question about 1990 Mighty Max
...something the poor have that the rich need and kills you if you eat it NOTHING! Poor people have nothing. Rich people do not need anything because they have everything. If you eat nothing, you'll
Question about 1990 Mighty Max
...something works, but not the way it's supposed to. Wire circuit example: Circuit poor electrical connection It means that the component (sensor, solenoids, actuator, etc.) connector is not fully ...
Usually answered in minutes!
6,442 Questions
5,455 Questions
4,073 Questions
2,449 Questions
2,268 Questions