Questions & Answers for: solid red status light wd

solid red status indicator is caused by leakage from capacitors C9A37 and C9A38 (3300mf/16v). The result is a bad fuse F9A02 (15amp pico) which reports error code 41 indicating short protect. The Mits

Solid red status light, code 41 after using menu/device on front! WD-62725 TV with a solid red status light on the front. Used the Device and the menu buttons to get the 41 error code. Error codes ...

...to red lamp Turned on TV and had no picture. Now when I reset I get green blinking light then solid green status. After about 30 seconded red lamp light comes on. Is there a solution? check the ...

...screen green flashing timer for two minutes then solid red light for bulb you may be on the incorrect input channel. look for an input or tv video button and choose each input until u get a ...

solid green, after a few seconds the red light comes on the status light, any suggestions Thanks Jason Unplug for a few minutes then plug back in to try to reset it. Sometimes it could take as long as

...light to blinking red on lamp inicator do i need a bulb or is it easier to buy the bulb/housing in whole? You can actually go with just buying a bulb. I have seen many cases where televisions stopped ...

...solid red status button, no sound or picture Makes sound, when powered on, as if (one of?) the wheels has problems with bearings. After a few seconds, status light goes solid red. check cables in the ...

WD 73733 tv; replaced bulb 1 month ago, tv runs for 4-5 hrs then black screen w sound & red lamp indicator. Power down for several minutes, tv resets and powers on. What's broken? over heating ...

...red status light comes on and when i checked, it is throwing code 61 Could be bad conections, I gues. I have downloaded the service manual of: ...

I HAVE A 73 INCH MITSHIBISHI TELEVISION THE STATUS LIGHT BLINKS GREEN THEN TURN RED, I HEAR SOUND BUT NO PICTURE WHAT DOES THAT MEAN Check the lamp