Questions & Answers for: solenoid shifter

Question about 2006 Cobalt

1 Answer

...solenoid on the shifter assembly. The solenoid goes bad. The next thing is the shifter itself breaks internally. I have also seen the shifter drowned with soda or coffee causing it to bind up not ...

Ad

Question about 2001 Accord

1 Answer

...solenoid on the shifter assembly that allows you to depress the button on the shifter to shift from park. this solenoid is controlled by the brake light switch on your brake pedal arm under the dash. ...

Ad

...shifter lock solenoid. You have to replace the whole shifter assembly if its not shifting out of park. It had to do with the safety feature of the brakes being applied before the car will shift into ...

Question about 2001 S-10

2 Answers

...shifter , access the solenoid and check for power an ground at solenoid with key on and brake pedal depressed. the solenoid unlocks the shifter gate that loks out gears until the brake pedal is ...

Question about 1998 Windstar

1 Answer

shifter has a solenoid that locks the shifter until you put your foot on the brake. If the brake switch fails or the fuse burns out, the brake will not signal the shift solenoid to unlock the shifter.

shifter lock solenoid is stuck. on certain european automobiles i have come across the shifter stays locked because the internal solenoid in the shifter assembly has gone bad and the entire shifter **

...shifter solenoid location where is the shifter solenoid located in the car Shift interlock solenoid locatex on shifter have to remove shifter bezel and possibly console and its usually a broken wire ...

wrong. The brake light switch mounted by the brake pedal arm or the shifter solenoid. Column shifter solenoids you can buy. But console shifters, you have to buy the entire shifter to get the solenoid

...shifter solenoid keep shorting out? shifter. no year vitara. 1989 to 2012? no symptoms.? (fire?, blowing fuses,?) the car must be a 3 speed or 4speed automatic and not the 5 speed stick box. and if ...

...shifter to replace the solenoid. I would check the resistance of the solenoid. Usually 30 to 40 ohms. check the plug to it(Corrrosion) and the resistance of the wires from the brake switch to the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...