Questions & Answers for: solder a jack

Ad

Question about Computers & Internet

1 Answer

...Solder From The Jack Post Pins..... DO NOT ATTEMP TO RIP OUT THE OLD JACK!!!!! You Will Pull The Contact rings from the center of the motherboard out and render the motherboard useless... Slowly and ...

Ad

Question about MDR-V700DJ Professional Headphones

1 Answer

...JACK..GET A SOLDERING IRON READY WITH SOLDER.. STRIP BACK A SMALL AMOUNT OT THE CABLE SLEEVE TO SHOW THE WIRES THEN STRIP BACK EACH OF THE CABLES AND TWIST THE ENDS SLIGHTLY..GET THE SOLDERING IRON ...

Ad

Question about MDR-V700DJ Professional Headphones

1 Answer

...solder new jack in place.For what it is worth, I opted to buy a replacement motherboard, (also available on EBay) and replaced it (About an hour job for anyone familiar with working on a portable ...

Question about MT6821 Notebook

1 Answer

...Jack..... Then Solder The New DC Jack Into Place... Solder The BottomSide First... The Pin Ends .. Then Flip Over and add small amount to the side negative pins and the power pin(s)... Now you are ...

Question about eMD620-5133 Notebook

1 Answer

...solder on all 3 and pull out the jack. Insert the pins of the new jack in the space vacated by the old pins and use a low diameter solder(2mm or less if available and lead free solder only) to solder ...

Question about Satellite P15-S420 Notebook

2 Answers

...on type the you will need to de-solder it from the board then solder a new one onto the board. most ac jack issue just need to resolder it unless the jack itself is broken. contact ...

...solder a new jack on to the motherboard, but you will have to solder. I have fixed several laptops by soldering a pigtail, a short length of two-conductor power cable, to the board contacts where the ...

Question about (8N816) Motherboard

1 Answer

...Jack solder joints on that Fujitsu Lifebook? The DC Power Jack (DC IN) is the jack on the laptop where the AC adapter (Charger) plugs into. Do any of them look oxidized? Dull finish on any of the ...

Question about Pavilion dv2000z Notebook

1 Answer

Jack, or solder joint/s.Laptop is to be completely disassembled, down to the BARE motherboard in your hand. (No Processor, no Ram Memory, Nada )This is a basic guide to DC Power Jack replacement,http:

Question about Pavilion dv2000z Notebook

1 Answer

...solder, socket screwdriver or 1/4" wrench, black electrical tape. Purchase necessary replacement jack. Remove plastic electronics cover plate, located on the back of the body, behind control knobs. ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Ekse

Level 3 Expert

13434 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...