Questions & Answers for: solder copper

Ad

Question about Heating & Cooling

1 Answer

solder will not stick to copper tubing Make sure you are using flux and that the copper is cleaned to a bright new apperance. Also make sure that you are using at least a 5% silver flow solder.

Ad

Question about Water Pipe Heating Cable

1 Answer

...copper solder solvent for fusing copper pipes if u wrapped with this copper tubing and cold soldered it might work it works on hot water copper pipes. If u try this and it works please keep me posted ...

Ad

Question about & One Handle Tub & Shower Faucet

1 Answer

...solder and new ones are very cheap. You should have 2 copper risers coming out of the floor, one cold, one hot. Cut them approx 12" above the floor. Repeat the same process for the tub spout and the ...

how to disassemble weller soldering iron Magnastat Station - 42W Hello, if the head element in the barrel of this soldering iron is shot. Recycle it and save the copper and other materials for ...

Question about 25 Watt Soldering Gun Kit

1 Answer

...better tips have iron plating over the copper which protects the copper. Silver solder applied over the bare copper works in much the same way and can be applied with a propane torch. Hope this

Question about Pavilion dv9000z Notebook

1 Answer

...solder to the copper pads. http://en.wikipedia.org/wiki/Ball_grid_array The cooling system in the HP Pavilion dv9700t Notebook PC (Laptop) consists of a Fan/Heatsink Assembly. The fan draws air up ...

Question about Pavilion dv9000z Notebook

1 Answer

How to solder copper woter pipe soldering couplers, elboes, pipe reducers in a copper water pipe Heat joint with torch, appy solder. Be careful not to set surrounding materials on fire!

Question about 24 in. SHU5305UC Built-in Dishwasher

1 Answer

and melt the solder connection. A better solution is to solder a short length of copper wire between the two pins to provide more copper and reduce the chance of heating as shown in the attached photo

Question about 24 in. SHE56C05UC Stainless Steel Built-in Dishwasher

1 Answer

and melt the solder connection. A better solution is to solder a short length of copper wire between the two pins to provide more copper and reduce the chance of heating as shown in the attached photo

Question about 24 in. SHE56C05UC Stainless Steel Built-in Dishwasher

1 Answer

...solder, soldering paste, and some copper wire. Practice joining bits of copper until you can do it quikly and without overheating the adjacent area. Then clean up the broken contacts and apply your ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Heating & Cooling Experts

Paul Carew

Level 3 Expert

3416 Answers

Donni Steen

Level 3 Expert

687 Answers

Marvin
Marvin

Level 3 Expert

84625 Answers

Are you a Heating & Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...