Questions & Answers for: socket outlets

Question about Electrical Supplies

1 Answer

...socket outlets. If for some reason you need a large number of spurs, it is time to replace the whole circuit rather than keep adding to it. The only safe way to do this is to run a new circuit from ...

Ad

Question about EPPD-3MS1 PRO-DRAINER Manual Sump Pump, 1/3 HP, 1 x 115

1 Answer

...the GFI breaker on the outlet The pump will trip the GFI breaker on the outlet Will the Gound fault socket (outlet) support the current rating of the pump is the outlet wired correctly where the ...

Ad

Question about 1.2 Cu. Ft. Mid-Size Microwave - Stainless-Steel

1 Answer

...was not running when this happened. It is possible that the interconnection link(s) between the two sockets in the duplex outlet have blown apart. Turn off power at the electrical panel for this ...

...outlets which look something like the PS2 sockets on older computer keyboards and mice. If you don't see this socket on the back of your TV, and you don't see the composite RGB sockets either, then ...

Question about DV-414 DVD Player

1 Answer

my 2004 envoy back Auxilary power outlet is not working it wont give any power check fuses and socket outlet. you might have power going to it from before the socket but socket could be faulty. if not

Question about DV-414 DVD Player

2 Answers

...outlet keep tripping off what do i do. the breaker in my electircal box for my electrical socket keep tripping off go to the qualified electricians on your place... but there is some

Question about 2005 Escalade AWD

1 Answer

...outlets no loner work. They have gone bad one by one, and the fuse is not blown. Could be debris in the socket of each outlet.  You would need to gain access to the back of the sockets to check ...

Question about 2005 Escalade AWD

1 Answer

...cord properly. Turn the printer on again. Is the printer connected to a correctly rated outlet/socket?Connect the printer to an AC power outlet/socket that you know works. Do not connect any ...

...outlets on the socket are wired to a different breaker. Or your main breaker is defective, You should always test outlets to confirm they are off before touching wiring, even if you turn of the main ...

How to repair a wall socket that has stopped working. turn of breaker --remove wall plate screw ---remove socket disconnect wires ---reconnect --replace --cover and turn on breaker How to Replace ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Brad Brown

Level 3 Expert

19187 Answers

john h

Level 3 Expert

29494 Answers

Are you an Electrical Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...