Needle position jammed? When turning on singer model 7442 there is a buzzing sound and all lights are flashing. With the side plate off you can see the needle position flicker but nothing happens. I ...
all the lights flashing and beeping constantly, wont sew at all , thought it may have been the light blub blown but the light blub only flickers on and off when you turn the machine off First,check ...
light bulb and look at the base of the bulb socket.. you should see a tang there ( small tab) that makes contact with the bulb.. sometimes that gets compressed to a point that it won't make electrical
Question about 7462 Mechanical Sewing Machine
...light encasement it went back on...it did this twice and so I removed the bulb. I tried cleaning the connection on both socket and bulb and in trying to put bulb back in it flashed on for a second I ...
While sewing, my light shut off. Flickered on and off for a minute, now completely off. Most likely, the light has burnt out. It's probably a type of appliance bulb. Take a look in your ...
Question about Quantum 9920 Computerized Sewing Machine
...change bulb 9920 singer and what size do I need? It is likely tehy simply slide in and out of their sockets. Try to pull tehm out when tehy are cold. These are supposed to be LED and they should last ...
Question about Quantum 9920 Computerized Sewing Machine
...light bulb on a Singer sewing machine Athena model 2009 ? I'm not familiar with this model, but in some machines, the bulb is in a socket underneath the arch. On some machines, you open the side door ...
Question about 4423 Heavy Duty Model Sewing Machine
...the replacement bulb TY120V15W to insert in the required place. Is this the wrong bulb? The light bulb will not snap in the socket. The bulb appears to be to big to screw in. quite likely is wrong ...
Question about 4423 Heavy Duty Model Sewing Machine
...light bulb is stuck. I am supposed to push it up and twist but it won't twist. I am able to push it up however. Any suggestions? Spay some WD40 into the socket and see if that frees it. Wipe the WD ...
Question about 4423 Heavy Duty Model Sewing Machine
...socket, making sure it is securely in place. Replace the cover by aligning it with the slot and gently pressing it back into place. Note: Make sure to use a light bulb that is compatible with your ...
Usually answered in minutes!
760 Questions
564 Questions
372 Questions
252 Questions
263 Questions