Questions & Answers for: socket light flickering

Ad

Question about Audio Players & Recorders

1 Answer

flickering red light on my secon day of use of the HTS i was listening to a cd when all the sudden it turned off I unplugged it and pulged it back in and saw a red light flicker once on the standby ...

Ad

Question about Spacemaker JVM1640SJ Microwave Oven

1 Answer

GE Spacemaker Microwave lights flicker on then off My GE Spacemaker Microwave lights flicker on when I attempt to turn them on, but won't stay on. Bulbs are good. The microwave is about 6-7 years old ...

Ad

...socket). Does your switch have a white wire for the neutral connection or are you using the ground wire to illuminate the switch ... or is there a different lind of light in the switch and/or do you ...

...light bulb socket ground wire for a clean tight connection, that being said the usual suspects are: 1. Faulty ground or power supply wire to headlight bulb socket. 2. Worn down solder contacts or ...

Question about 1995 VF 750 C Magna

1 Answer

I think the socket is bad if the socket looks burnt or bulb doesn't fit tight maybe so turn light on and wiggle wires at back of socket see if light flickers check connections further back on harness

Question about 1995 VF 750 C Magna

1 Answer

lights in ceiling fan flicker when turned on lights in hunter ceiling fan flicker when turned on Make sure you have the correct wattage for the socket!

Question about 1995 VF 750 C Magna

1 Answer

light flickering Underwater lights flickering could be a loose wire or bulb could be loose in socket

new bulb , when inserted it flickers and buzzes and won't light? Is it the socket? It is not the socket. If the bulb is installed correctly, there is a starter on the ballast that needs to be replaced

Question about Sunvision Pro 24S Tanning Bed

1 Answer

socket light flickering Brand new Loose connection or bad bulb. Also check the center pin of the socket, if its lying flat against the body it may be too far down for the bulb to contact properly, and

Question about Sunvision Pro 24S Tanning Bed

1 Answer

...but it heats normal. What causes this and is it unsafe? If you're referring to the cavity light, it's possible the bulb is just loose in its socket. The cover has to be removed to access the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5259 Answers

The Knight
The Knight

Level 3 Expert

74634 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...